Felicity slush fund currently:

£1,409.29

Sunday, 10 April 2011

Captive nuts - the last one, really this time!

I tried my best to save this captive nut for the rear passenger wing, but it is too far gone. I started by drilling around the nut with a small drill bit at first.



I completed surrounding the nut.



Added a few more holes.



Then I moved up a drill size or two.







The reason the captive nut couldn't be saved, most of the bolt was still in!



A quick bit of welding to hold the new captive nut in place.



After grinding down the weld I filled in.



A little sanding.


One more application of filler should make the repair invisible.

Saturday, 9 April 2011

Seam sealer - application

Masking tape applied to the edges of the welds. Seam sealer brushed on with an ordinary 1/2' paint brush. I found the sealer kept sticking to the brush and had to dip the brush into some white spirit.














Sunday, 3 April 2011

Filling - just one more time















Horn - placement

The new part (front passenger side clip section) had no place for the horn to be attached. So I detatched the old horn bracket.



It seemed to fit, just needed welding.


On the other side was the redundant bracket for the front bumper. It could attach to this with ease. Just need to lengthen the cables.


Seam sealer - front section

I had some brushable seam sealer to apply. I first masked off the areas, applied with a 1/2 inch paint brush which I kept dipping into white spirit. The masking tape needed to be removed shortly after, before the sealer had started to dry too much.