Filling - just one more time

Horn - placement

The new part (front passenger side clip section) had no place for the horn to be attached. So I detatched the old horn bracket.



It seemed to fit, just needed welding.


On the other side was the redundant bracket for the front bumper. It could attach to this with ease. Just need to lengthen the cables.

Seam sealer - front section

I had some brushable seam sealer to apply. I first masked off the areas, applied with a 1/2 inch paint brush which I kept dipping into white spirit. The masking tape needed to be removed shortly after, before the sealer had started to dry too much.