Friday, 22 April 2011
Chasis - prep for paint
Before painting, I checked that the chasis needed no new holes or welding to be done.
Checked the battery fitted.
The t-connection for the brake lines at the rear needed fitting.
Then I removed all the brake hoses and lines.
The biggest job was to make sure the pedal assembly fitted.
Needed 2 holes to attached this pedal bracket.
Fitted oversize bolts because it was all I had. Just needed top carefully cut them with the nut on, then when I remove the nut it would maintain the thread.
Subscribe to:
Posts (Atom)