Intsalling the wiring loom

Body on the floor - rubber gasket

fresh air intake control line

Fuel tank - POR 15

After the metal ready a week went by and the tank was kept inside. I positioned a hair dryer to ensure that it was bone dry.



Then I added the POR15 tank sealant.


Rolled the tank around for 20 mins to make sure all surfaces where covered. Drained and left to dry.

Changing the engine oil

Sump nut needs a 17mm socket and the sump plate needs 10mm.
I used some engine flush as well.

Change the gear box oil.

Fuel tank prep

This tank is second hand and I found a few pin hole leaks. Unlike the manual, I welded up some areas that looked to be weak. It has never had any petrol in it since I've had it (a few months). I though I should seal it properly as well.

First of all I used some metal ready. Sealed the tank the best I could and agitated it to cover all internal surfaces.


I left it for several hours in each position.