Friday, 22 April 2011
Chasis - prep for paint
Before painting, I checked that the chasis needed no new holes or welding to be done.
Checked the battery fitted.
The t-connection for the brake lines at the rear needed fitting.
Then I removed all the brake hoses and lines.
The biggest job was to make sure the pedal assembly fitted.
Needed 2 holes to attached this pedal bracket.
Fitted oversize bolts because it was all I had. Just needed top carefully cut them with the nut on, then when I remove the nut it would maintain the thread.
Sunday, 17 April 2011
New (old) petrol tank
Saturday, 16 April 2011
Seam sealing the rear of the body
After using the first 1kg tin of seam sealer on the front I had to get a second. For the rear I was a little more liberal with its application and tried to seal any water traps.















A coat of vactan on the inner seams.

A small hole on the passenger could be seen below the guttering, toward the engine compartment. It was a larger hole on the inside but more importantly, could allow water in.



Just a little bit of filling.
A coat of vactan on the inner seams.
Just a little bit of filling.
Subscribe to:
Posts (Atom)