Felicity slush fund currently:

£1,409.29

Sunday, 22 August 2010

Removing the stickers

Unfortunately I was unable to remove the 'Marinablau' sticker as it just came away in strips. The less interesting stickers where fine.



Will she look like this with a new paint job?

Sunday, 15 August 2010

Front brakes cleaning

Time to take the front brakes apart.


Fortunately the brake cylinders on the front where in good condition and could be used again. I removed them for cleaning.


Once I'd given everything a quick clean, ensured the adjusters where working and the brake pads had reasonable life in them, I put them back together.


The brake drum was kurusted and will be painted later. You can just see the outer bearing above being pushed into place. The inner bearing remained on the drum.


The outer bearing retaining washer pushed in keeping itself in the locating chanel that can just be seen above.


Finally the cover which has a hole in it for the speedo cable.

The first shots of the body on the floor

Body on the floor.



A spot of rust inside.



The heater channels may need replacing.


The body can now be pushed into the garage to keep it out of the elements whilst I arrange the shot blasting.


The squirrels no longer have a home

This is where the body has been resting.


A collection of rust has fallen along where the heater channels were.


And some nuts!


I guess the squirrels have been using the body whilst I wasn't.

All the wheels on

With the body due to go off to be shot blasted I put all the wheels on. The Body was only a walk away but needed 4 people to carry it. Once on the floor it could be transferred to a trailer with ease.


The floor is resting on four axle stands.


Saturday, 7 August 2010

Attaching the rear axel/ gear housing

As I had no idea what needed replacing or was missing, I put things together first.

The bolts for the gear cradle where fine, it was just the rubber that needed replacing. According to the books and a chap I spoke to at VW heritage, this has the wrong type of cradle for the year. As my only aim is to get it through the MOT this is not a priority.


The internal nuts that attach the cradle to the gear box where fine.


The front gear box dampener needs replacing, but again the nuts are fine. Just need a bit of a clean.


When striping the body I was not as careful as I could have been. This tin of random screws, nuts and bolt is testament to others that whilst documenting each and every bit is tedious, its less fun guessing where they go!


A bit of military organisation helps.

Time to sort out the Axel boots.


The second one looked better but you might as well replace them both.


There wasn't a whole lot of rust to be cleaned.


Then an ample amount of grease was added.


Before the new boot was attached.